Voith
Intelligent Robotics
Energy consumption is rapidly increasing. At the same time, it is becoming harder to keep energy production and consumption in balance...
About Us
Voith

Company introduction
Energy consumption is rapidly increasing. At the same time, it is becoming harder to keep energy production and consumption in balance at all times. As multi-functional power plants, pumped storage facilities have a high potential to meet this challenge, because their technology is based on the only long-term, technically proven and cost-effective form of storing energy on a large scale, thereby making it available at short notice.Voith developed the first large, single-stage pump turbine, which operated both as a turbine for energy generation and in the reverse direction as a pump. Today, nearly 450 Voith pump turbines have been installed worldwide with a combined output of more than 60 000 megawatts. With a wide range of specific speeds, pump turbines can be installed at sites with heads up to 800 meters and with unit capacities ranging from less than 10 to 500 megawatts. Voith is continually advancing its state-of-the-art technological capabilities with developments that include variable-speed technology and wide head range applications. These machines have proven extremely reliable in practical operation.Hybrid solutions – such pumped storage power plants combined with wind and/or solar farms – are becoming increasingly important for the generation and storage of clean, renewable energy, as well as in the production of drinking water. With the innovative concept of combining wind power and hydropower together, the upper basin is integrated into the foundation of the wind turbine towers. Planning and infrastructure costs, as well as environmental impact, can be reduced as the two technologies use the same grid connection and switchgear. Combining the technologies creates new trading alternatives that are not possible in a pure wind farm operation. This is expanding the potential of decentralized pumped storage. Should the wind turbines deliver more energy than needed, water is pumped from the lower basin into the upper basin of the wind turbines. If there is no wind blowing or a higher demand of energy arises, the water flows from the upper basin through the turbine into the lower basin. This will drive a turbine that will generate via the connected motor generator electricity and release it into the grid.The use of saltwater for pumped storage plants with the ocean as the lower reservoir, instead of using precious fresh water, offers a huge potential. This symbiotic saltwater concept could be an application for small grids on islands. The challenges of protecting equipment against corrosion can be solved technically. By combining a seawater pumped storage system and a desalination plant, using reverse osmosis (RO) to turn seawater into drinking water, we can help provide fresh water in arid coastal areas and environmentally friendly energy at the same time. The ocean would be used as the lower reservoir, with the upper reservoir in nearby coastal mountains.The webcast will compare lithium-ion (Li-ion) batteries with pumped storage hydropower. Topics will concentrate on raw materials, investment costs and CO2 footprints. Dr. Krueger has worked at several national and international thermal and hydropower plants and in different management positions.The operating principle –both simple and ingeniousThe principle behind the operation of pumped storage power plants is both simple and ingenious. Their special feature: They are an energy store and a hydroelectric power plant in one. If there is a surplus of power in the grid, the pumped storage power station switches to pumping mode – an electric motor drives the pump turbines, which pumps water from a lower reservoir to a higher storage basin. If the demand for electricity in the grid rises, water is released from the upper basin via a pressure pipeline to the bottom. The water causes the pump turbines to rotate, now operating in turbine mode and used to drive the generators. Within seconds, electricity is generated and fed into the grid.Voith has delivered this technology since its inception.Reversible machine sets consist of a motor generator and a reversible pump turbine that works either as a pump or as a turbine depending on the direction of rotation. This design allows for compact power houses that save equipment and civil costs. With a wide range of specific speeds, pump turbines can be installed at sites with heads from less than 50 and up to 800 m, and with unit capacities ranging from less than 10 to over 500 MW.The conventional reversible units are operated at nominal rotational speed. These units are capable of regulation in turbine mode, and the respective load range is between 50 and 100% of nominal power. Fixed speed units are a proven technology and are applied in various pumped storage plants worldwide.With the use of an asynchronous motor generator, the rotational speed of the pump turbine can be varied. Thus, the pump capacity can be adjusted to use only the amount of energy currently available. This allows for highly efficient stabilization of the grid.Ternary systems consist of a motor generator and a separate turbine (typically Francis or Pelton) and pump set. As two separate hydraulic machines, the rotational direction of the motor generator can be the same in both operational modes. This results in considerable commercial value for the power plant's operation. For the switch between turbine and pump operation, a clutch operable at standstill, a starting turbine or a synchronizing torque converter can be provided.
Products & Solutions
Explore our products
Products & capabilities
Explore company productsCompany Channels
Explore more
About
View channelCatalog
View channelProducts
View channelNews
View channelCertifications
View channelContact
View channelBrands
View channelVideos
View channelPartners
View channelStart a Conversation
Have a project in mind?
Contact Voith to discuss your requirements.